Author(s):
M. Sherin Banu, V. Raj, M. Mubarak Ali
Email(s):
sherinbanu77@gmail.com
DOI:
Not Available
Address:
M. Sherin Banu1*, V. Raj2 and M. Mubarak Ali3
1Department of Chemistry, Government Arts College, Salem-636 007, Tamil Nadu, India
2Department of Chemistry, Periyar University, Salem-636 011, Tamil Nadu, India
3School of Display and Chemical Engineering, Yeungnam University, Gyeongsan, South Korea
*Corresponding Author
Published In:
Volume - 4,
Issue - 11,
Year - 2011
ABSTRACT:
Immersion tin coatings were formed directly on aluminium by microwave irradiation from acidic tin chloride bath. The corrosion resistance behaviour of the coatings was studied by Tafel polarization and EIS. The effects of bath composition, temperature and irradiation time on the kinetics of immersion plating of tin onto aluminium were investigated. The surface morphology of the coatings has been analyzed by SEM. The phase composition of the coatings was analyzed by X-Ray Diffraction. The deposit structure is found to be more crystalline. It is found that the deposited tin is dissolved again after a long time immersion in plating solution.
Cite this article:
M. Sherin Banu, V. Raj, M. Mubarak Ali. Immersion Plating of Tin on Aluminium by Microwave Irradiation in Acidic Medium. Asian J. Research Chem. 4(11): Nov., 2011; Page 1726-1731.
Cite(Electronic):
M. Sherin Banu, V. Raj, M. Mubarak Ali. Immersion Plating of Tin on Aluminium by Microwave Irradiation in Acidic Medium. Asian J. Research Chem. 4(11): Nov., 2011; Page 1726-1731. Available on: https://ajrconline.org/AbstractView.aspx?PID=2011-4-11-15